As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Gcostar Char-Broil Performance 5-Burner G470 Burner Kit Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

Gcostar's five-piece kit is built around the Char-Broil Performance 5-burner grills: 463347519, 463347518, 463243519, 463275517, 463243518, 463275717, 463373019 and 463373319. It holds five 17-3/4 x 3/5 in stainless burners, five 16-15/16 x 2-1/12 in stainless heat plates, four crossover tubes adjustable from 5 to 8.5 in and two igniters, and lists OEM burner numbers G470-5200-W1 and G321-4C00-W1 plus heat plates G470-0004-W1 and G470-0004-W1A. Our verdict: a well-documented rebuild for a five-burner Performance, and it names more OEM cross-references than most kits of this type. Gcostar's buying note is confusing for other sizes (it says two kits for a 4-burner grill), so treat the parts as singles on 2, 4 and 6-burner grills, as the listing also says. This review is based on Gcostar's listing and part sizes, not hands-on installation.

What stands out

  • Gcostar kit for Performance 5-burner 463347519
  • 5 x 17-3/4 in stainless burners
  • 5 x 16-15/16 in heat plates
  • 4 crossovers (5-8.5 in), 2 igniters

Who it fits

Good fit for

Owners of a five-burner Char-Broil Performance (463347519 family) who want burners, heat plates, crossovers and igniters in one order.

Who should skip it

Owners of newer Performance 420/480 grills with 15-3/8 in burners, or anyone wanting a single burner.

Verdict: A five-burner G470 rebuild set with wide OEM cross-references.

Gcostar 5-burner kit key specs

Gcostar 5-burner kit burners: five, 17-3/4 x 3/5 in

Cross-referenced to G470-5200-W1 and G321-4C00-W1.

Gcostar 5-burner kit heat plates: five, 16-15/16 x 2-1/12 in

Cross-referenced to G470-0004-W1 and -W1A.

Gcostar 5-burner kit crossovers: four, 5 to 8.5 in

Shorter adjustment range than some 9.5 in kits.

Gcostar 5-burner kit igniters: two

Partial igniter replacement.

Gcostar 5-burner kit size fields: 5 x 5 x 5 in

Placeholders; use the part sizes.

How the Gcostar five-piece kit is laid out

Gcostar packs one burner and one heat plate for each of the five positions in a Performance 5-burner firebox, plus a crossover for each gap. The crossovers slide from 5 to 8.5 in, a little shorter at full stretch than kits that reach 9.5 in, so measure the gap between your burners. Two OEM numbers are listed for both burner and plate, which helps owners whose manual shows the older G321 or -W1A codes.

Fitting the kit to a 463347519

Disconnect the gas, remove grates and old heat tents, and unbolt the burners from the back of the firebox. Slide each new burner onto its valve orifice, set and lock the crossovers, then drop the heat plates in place. Fit the new igniters to the two burners that carry them, light each burner and check the flame passes across every crossover.

Before buying the Gcostar 5-burner kit

Measure the burner and the crossover gap.

Check before you buy

  • Gcostar burners: 17-3/4 in
  • Crossover reach: 5 to 8.5 in
  • Kit sizing notes for other grills are confusing
  • Gcostar G470 kit skips 420/480 grills

The product at a glance

Gcostar Stainless Steel Grill Burner Kit

Best for: Five-burner Char-Broil Performance owners

Burner Length
17-3/4"
Material
Stainless steel
Included Components
Burner, heat plates, crossover tube
Fuel Type
Gas
Dimensions
5 × 5 × 5 inches

View on Amazon: Gcostar Stainless Steel Grill Burner Kit Affiliate link

Gcostar kit for Char-Broil Performance 5-burner grills (463347519 family): five 17-3/4 in stainless burners, five 16-15/16 in stainless heat plates, four crossovers adjustable 5-8.5 in, two igniters; cross-referenced to G470 and G321 OEM numbers.

Pros

  • Gcostar lists two OEM codes for each part
  • Parts count matches a five-burner grill
  • Igniters included

Cons

  • Gcostar crossover reach stops at 8.5 in
  • Confusing kit-count advice for 4-burner grills
  • Placeholder size fields

Good fit if

  • You own a Performance 463347519 or 463275517
  • Your manual lists G321-4C00-W1 burners

Skip if

  • Your grill uses 15-3/8 in burners
  • Your crossover gap is over 8.5 in

Verdict: A five-burner G470 kit with extra OEM cross-references.

Specifications side by side

Spec Gcostar Stainless Steel Grill Burner Kit
Burner Length 17-3/4"
Material Stainless steel
Included Components Burner, heat plates, crossover tube
Fuel Type Gas
Dimensions 5 × 5 × 5 inches
Color 5 Pack
Model 1

Frequently asked questions

Does the Gcostar 5-burner kit fit the Char-Broil 463347519?

Yes, the 463347519 heads its list of five-burner Performance models.

What is in the Gcostar Char-Broil 5-burner kit?

Five burners, five heat plates, four adjustable crossover tubes and two igniters.

Which OEM parts does the Gcostar 5-burner kit replace?

Burners G470-5200-W1 and G321-4C00-W1, heat plates G470-0004-W1 and G470-0004-W1A.

How far do the Gcostar crossover tubes adjust?

From 5 to 8.5 in.

Can the Gcostar 5-burner kit be used on a 4-burner Performance 475?

The parts fit as individual replacements on 2, 4 and 6-burner Performance models, per the listing.

See also