Gcostar H01 Char-Broil Performance 4-Burner Repair Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Gcostar H01 is a stainless steel rebuild kit for older Char-Broil Performance gas grills, mainly the Performance 475 4-burner (models such as 463342119, 463332718 and 463376419). In the box are four 17 3/4 inch burners that replace Char-Broil G470-5200-W1, four 16 15/16 x 2 1/12 inch heat plates that replace G470-0004-W1, two igniters and three crossover tubes that adjust from 5 to 8.6 inches. The listing also names Performance 2, 5 and 6-burner models, but a 4-pack only covers a full 4-burner rebuild. It does not fit the newer 4-burner models 463365021, 463365522, 463352521 and 463458021. It suits a 475 owner whose burners and heat tents have rusted out. Match your grill number to the H01 fit list. We read the H01 listing.
What stands out
- 4 burners + 4 heat plates
- Replaces G470-5200-W1 / G470-0004-W1
- 2 igniters, 3 crossover tubes
- Older Performance 475 4-burner
Who it fits
Good fit for
Owners of an older Char-Broil Performance 475 4-burner grill with rusted burners and heat plates.
Who should skip it
Owners of newer Performance 420 or 480 grills (463365021, 463352521 and similar), which take shorter burners.
Verdict: A full stainless rebuild for older Performance 475 4-burner grills.
Gcostar H01 kit
4 x 17 3/4 in burners
Replace Char-Broil G470-5200-W1.
4 heat plates
16 15/16 x 2 1/12 in, replace G470-0004-W1.
3 crossover tubes
Adjust from 5 to 8.6 in.
2 igniters
Included with the H01.
Not for 463365021
Nor 463365522, 463352521, 463458021.
What the H01 parts are
All burners and heat plates in the H01 are stainless steel. The burners are the long 17 3/4 inch style used on older Performance grills, and the heat plates are the tent-shaped shields that sit above them. Adjustable crossover tubes carry flame from burner to burner at light-up, and two igniters replace the spark electrodes.
Rebuilding a Performance 475
With the tank off, lift out the grates and old heat plates, unscrew each burner at the back of the firebox and slide it off its valve. Fit the new burners one by one, hook the crossover tubes between them, then set the new heat plates on top. Test-light each burner with the lid open before cooking. A full set of fresh burners and plates clears most hot spots caused by rust holes.
Before you order the Gcostar H01
Check your model and burner length.
Check before you buy
- Old burners 17 3/4 in long
- Model on the 475 4-burner list
- 420 and 480 grills need another kit
- Leak test after the rebuild
The product at a glance
Gcostar 4-Burner Stainless Grill Rebuild Kit
Best for: Char-Broil Performance 475 owners
- Burner Length
- 17 3/4"
- Material
- Stainless steel
- Burner Quantity
- 4
- Included Components
- Heat plates, igniters, crossover tubes
- Dimensions
- 1 × 0.99 × 10 inches
View on Amazon: Gcostar 4-Burner Stainless Grill Rebuild Kit Affiliate link
Gcostar H01: stainless rebuild kit for older Char-Broil Performance 475 4-burner grills: 4 x 17 3/4 in burners (G470-5200-W1), 4 x 16 15/16 x 2 1/12 in heat plates (G470-0004-W1), 2 igniters, 3 crossover tubes (5 to 8.6 in); not for 463365021 and newer.
Pros
- Complete 4-burner rebuild
- Stainless parts
- OEM part numbers listed
Cons
- Not for newer 420/480 grills
- Long fit list to check
Good fit if
- You own an older Performance 475
- Your burners rusted through
Skip if
- You own a 420 or 480
- You need one part only
Verdict: A full burner and heat plate set for older Performance 475 grills.
Specifications side by side
| Spec | Gcostar 4-Burner Stainless Grill Rebuild Kit |
|---|---|
| Burner Length | 17 3/4" |
| Material | Stainless steel |
| Burner Quantity | 4 |
| Included Components | Heat plates, igniters, crossover tubes |
| Dimensions | 1 × 0.99 × 10 inches |
| Color | 4Pack |
| Model | H01 |
Frequently asked questions
Which Char-Broil grills does the Gcostar H01 fit?
Older Char-Broil Performance 475 4-burner grills such as 463342119, 463332718 and 463376419, with other Performance models listed by number.
What comes in the Gcostar H01 kit?
Four burners, four heat plates, two igniters and three adjustable crossover tubes.
What size are the Gcostar H01 burners?
17 3/4 inches long, replacing Char-Broil G470-5200-W1.
Does the Gcostar H01 fit the Char-Broil 463365021?
No, the listing excludes the newer 463365021, 463365522, 463352521 and 463458021.
Are the Gcostar H01 parts stainless steel?
Yes, the burners and heat plates are stainless steel.
