Uniflasy Char-Broil Performance 6-Burner Repair Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This Uniflasy repair kit is sized for six-burner Char-Broil Performance gas grills such as the 463276517, 463244819 and 463274819. The box holds six 17-3/4 in stainless burners (OEM G470-5200-W1), six 16-15/16 in stainless heat plates (G470-0004-W1), five crossover tubes that adjust from 5 to 9.5 in, crossover instructions and two igniters. Our verdict: a sensible one-order rebuild for an older six-burner Performance whose burners and heat tents have rusted together, with parts left over if you use it on a smaller grill from the fit list. Uniflasy warns it does not fit the newer Performance series (463458021, 463365021, 463351521), which use 15-3/8 in burners. This review is based on Uniflasy's listing and published part sizes, not on our own installation.
What stands out
- Uniflasy kit for 6-burner Char-Broil Performance
- 6 x 17-3/4 in G470-5200-W1 burners
- 6 x 16-15/16 in G470-0004-W1 heat plates
- 5 adjustable crossovers, 2 igniters
Who it fits
Good fit for
Owners of older six-burner Char-Broil Performance grills (463276517, 463244819 family) who want every burner and heat tent replaced at once.
Who should skip it
Owners of newer Performance grills with 15-3/8 in burners (463365021, 463458021), or anyone who needs only one or two parts.
Verdict: A full burner and heat plate set for older six-burner Char-Broil Performance grills.
Uniflasy 6-burner kit key specs
Uniflasy 6-burner kit burners: six, 17-3/4 x 3/5 in
OEM G470-5200-W1, stainless.
Uniflasy 6-burner kit heat plates: six, 16-15/16 x 2-1/12 in
OEM G470-0004-W1, non-magnetic stainless.
Uniflasy 6-burner kit crossovers: five, 5 to 9.5 in
Adjust to your burner spacing.
Uniflasy 6-burner kit igniters: two
Covers the common igniter failure too.
Uniflasy 6-burner kit exclusions: 463458021, 463365021, 463351521
Newer series with different parts.
What is in the Uniflasy six-burner box
Each burner is a straight 17-3/4 in stainless tube matching Char-Broil's G470-5200-W1, and each heat plate is a 16-15/16 in stainless tent that sits over a burner to spread heat and shield it from drips. The crossover tubes slide to length between 5 and 9.5 in so flame can pass from one burner to the next at lighting. Uniflasy includes written instructions for setting the crossovers, which is the step most often done wrong on these grills.
Fitting the kit to a six-burner Performance
Shut off and disconnect the tank, lift out the grates and old heat tents, and unscrew each burner from the rear of the firebox. Fit the new burners onto the valve orifices, set each crossover to the gap between burners, then lay the new heat plates on top. Light each burner in turn and check that flame carries across the crossovers before cooking.
Before buying the Uniflasy 6-burner kit
Measure one old burner: it should be 17-3/4 in.
Check before you buy
- Uniflasy kit: G470-5200-W1 burners only
- Not for 463458021, 463365021, 463351521
- Six of each part, five crossovers
- Size fields are placeholders
The product at a glance
Uniflasy 6-Burner Stainless Steel Repair Kit
Best for: Older Char-Broil Performance 6-burner owners
- Burner Length
- 17 3/4"
- Material
- Stainless steel
- Burner Quantity
- 6
- Included Components
- heat plates, crossover tubes, ignitor
- Fuel Type
- Liquid Propane
- Dimensions
- 1 × 1 × 10 inches
View on Amazon: Uniflasy 6-Burner Stainless Steel Repair Kit Affiliate link
Uniflasy repair kit for older Char-Broil Performance 6-burner grills: six 17-3/4 in stainless G470-5200-W1 burners, six 16-15/16 in stainless G470-0004-W1 heat plates, five adjustable crossovers, two igniters and crossover instructions.
Pros
- Uniflasy 6-burner kit replaces every burner and tent at once
- Igniters and crossover guide included
- Long fit list for older Performance grills
Cons
- Uniflasy 6-burner kit skips newer Performance series
- Placeholder size fields
- Uniflasy lists no warranty for the 6-burner kit
Good fit if
- You own a 463276517 or 463244819
- Your heat tents are rusted through
Skip if
- Your grill uses 15-3/8 in burners
- You need just one burner
Verdict: A complete six-burner rebuild kit for older Char-Broil Performance grills.
Specifications side by side
| Spec | Uniflasy 6-Burner Stainless Steel Repair Kit |
|---|---|
| Burner Length | 17 3/4" |
| Material | Stainless steel |
| Burner Quantity | 6 |
| Included Components | heat plates, crossover tubes, ignitor |
| Fuel Type | Liquid Propane |
| Dimensions | 1 × 1 × 10 inches |
| Size | 17.45" Burner +16.93" Heat Plate 6pack |
| Color | Sliver |
| Model | 463276517 |
Frequently asked questions
Does the Uniflasy 6-burner kit fit the Char-Broil 463276517?
Yes, it is listed for the 463276517, 463244819, 463274819 and other older six-burner Performance grills.
What burner size is in the Uniflasy 6-burner Char-Broil kit?
17-3/4 x 3/5 in stainless burners, OEM part G470-5200-W1.
Does the Uniflasy 6-burner Char-Broil kit include igniters?
Yes, two igniters are in the box with the burners, heat plates and crossovers.
Will the Uniflasy 6-burner kit fit a Char-Broil 463365021?
No, Uniflasy lists the 463365021 as a different series that this kit does not fit.
Can the Uniflasy 6-burner kit be used on a 4-burner Performance?
The fit list includes some 2, 4 and 5-burner Performance models; you would have spare parts left over.
See also
- utheer char broil performance 5 burner kit review
- criditpid char broil tru infrared 4 burner kit review
- gcostar char broil performance 5 burner g470 kit review
- uniflasy 41862 grill burner weber review
- uniflasy grill replacement parts charbroil review
- winco 6 qt stainless steel review
- ownsig 23 6 stainless steel laundry review
