QuliMetal Traeger Pro 34/780 Pellet Grill Cover Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The QuliMetal heavy-duty grill cover is a 53 x 27 x 49 inch full-length cover for large pellet grills, built from 600D polyester Oxford fabric with a PVC waterproof layer. It is a good pick for owners of a Traeger Pro 34, Pro 780, Texas Elite 34, Century 34 or Texas Pro who want a fitted cover with a long named fit list for much less than a branded one; the listing also names the Traeger BAC380 size, TFB65LZBC and Z Grills 700, 550 and 600 series. Elastic drawstring straps hold it in wind, dual air vents cut condensation, and reflective strips help you spot the grill at night. This is an accessory review drawn from the listing and published specs.
What stands out
- 53 x 27 x 49 in full length
- Fits Traeger Pro 34 and Pro 780
- 600D polyester with PVC layer
- Dual air vents and drawstring
Who it fits
Good fit for
Owners of a Traeger Pro 34, Pro 780 or Texas-series grill, or a Z Grills 550, 600 or 700, who leave the grill outside.
Who should skip it
Owners of smaller pellet grills such as a Traeger Pro 22 or 575, where a 53 in cover will hang loose, and owners of offset smokers of other shapes.
Verdict: A well-specified, full-length cover for the large Traeger and Z Grills pellet models; match your model to the fit list.
QuliMetal Traeger Pro 34 cover specs
53 x 27 x 49 in
Full-length size, reaches near the ground.
600D polyester Oxford
With an upgraded PVC waterproof layer.
Dual air vents
Reduce condensation under the cover.
Elastic drawstring
Keeps the cover on in high wind.
Reflective strips
Make the grill easier to see at night.
Design and build
QuliMetal makes this cover from fade-resistant 600D polyester Oxford with a UV and water-resistant coating, a PVC waterproof layer and double stitching. Two vents near the top let damp air out, an elastic drawstring at the hem pulls it tight, and reflective strips are sewn on. The model field in the listing is a placeholder, so order by the Traeger and Z Grills fit list in the title and features.
Everyday use
Let the pellet grill cool completely, then pull the cover down over the hopper and shelves and draw the hem tight. Rinse dirt off the smooth surface with water, wipe away water spots and let it dry before folding it away. The vents keep moisture from sitting on the steel between cooks.
Before you buy the QuliMetal pellet grill cover
Checks before ordering.
Check before you buy
- Match your grill to the fit list
- Cover a cool grill only
- 53 x 27 x 49 in size
- Order by grill model, not code
The product at a glance
QuliMetal 53-Inch 600D Pellet Grill Cover
Best for: Traeger Pro 34 and 780 owners
- Compatible Appliance
- Traeger Pro 34/780, Texas Elite 34
- Dimensions
- 53" x 27" x 49"
- Fabric Density
- 600D
- Material
- Polyester oxford fabric
- Waterproof Lining
- PVC
- Closure Type
- Elastic drawstring straps
View on Amazon: QuliMetal 53-Inch 600D Pellet Grill Cover Affiliate link
QuliMetal full-length pellet grill cover: 53 x 27 x 49 in, 600D polyester Oxford with PVC waterproof layer, double stitching, dual air vents, elastic drawstring, reflective strips; fits Traeger Pro 34/780, Texas and Z Grills 550/600/700.
Pros
- Long named fit list
- Vents against condensation
- Drawstring for wind
Cons
- Too big for Pro 22 or 575
- Model field is a placeholder
- No warranty term stated
Good fit if
- You own a Traeger Pro 34 or 780
- You own a Z Grills 700
Skip if
- Your pellet grill is a Pro 22
- You need a short half cover
Verdict: A full-length 600D cover for large Traeger and Z Grills pellet grills.
Specifications side by side
| Spec | QuliMetal 53-Inch 600D Pellet Grill Cover |
|---|---|
| Compatible Appliance | Traeger Pro 34/780, Texas Elite 34 |
| Dimensions | 53" x 27" x 49" |
| Fabric Density | 600D |
| Material | Polyester oxford fabric |
| Waterproof Lining | PVC |
| Closure Type | Elastic drawstring straps |
| UV Protection | UV-resistant coating |
| Fuel Type | Wood Pellet |
| Included Accessories | Cover |
| Water Resistance | Waterproof |
| Size | TR Pro 34/780 |
| Color | Black |
| Model | dsgsewwa |
Frequently asked questions
Which grills does the QuliMetal Traeger Pro 34 cover fit?
Traeger Pro 34, Pro 780, Texas Elite 34, Century 34, Texas Pro, BAC380 size and TFB65LZBC, plus Z Grills 700, 550 and 600 series.
What size is the QuliMetal Traeger Pro 34 cover?
53 in wide, 27 in deep and 49 in high.
What fabric is the QuliMetal Traeger Pro 34 cover made of?
600D polyester Oxford with a PVC waterproof layer.
Does the QuliMetal Traeger Pro 34 cover have vents?
Yes, two air vents to reduce condensation.
How do you clean the QuliMetal Traeger Pro 34 cover?
Rinse with water and wipe off water spots with a cloth; let it dry before storing.
Featured in
See also
- qulimetal 81035 foldable camping grill review
- marsh allen 30052amz cast iron hibachi grill review
- napoleon rogue pro 625 natural gas grill review
- best outdoor pizza ovens under 100
- best outdoor pizza ovens under 150
- 9 Best Outdoor Pizza Ovens Under $200, Compared
- Best Outdoor Pizza Ovens Under $300 in 2026: 10 Picks Ranked by Specs
- Best Outdoor Pizza Ovens Under $500: 9 Spec-Based Picks
- milwaukee heavy duty review
- singer singer heavy duty 0460next review
