Onlyfire 18 x 12.5 Inch Stainless Steel Griddle Insert Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Onlyfire 18 x 12.5 inch griddle insert is a stainless steel flat top that sits on the grates of a gas or charcoal grill and turns part of it into a griddle. It is the pick for a grill owner who wants smash burgers, eggs or fried rice outside without buying a separate griddle station, because it costs far less and stores flat. The plate is 18 in wide, 12.5 in deep and 2.7 in high, giving a bit over 200 sq in of cooking surface, and it weighs 8.71 lb. Sidewalls keep food on the plate, a grease trough catches drippings, and two removable handles come with a wrench. We wrote this review from the listing and published specs, not from hands-on testing.
What stands out
- 18 x 12.5 in plate, over 200 sq in
- 2.7 in sidewalls on the plate
- Grease trough along the edge
- Two removable handles plus wrench
Who it fits
Good fit for
Owners of a mid-size gas or charcoal grill with a grate area larger than 18 x 12.5 in who want a griddle zone for breakfast, burgers or stir-fry.
Who should skip it
Anyone with a small portable grill whose grate is under 18 in wide, or cooks who want a fully seasoned carbon-steel surface rather than stainless.
Verdict: A simple, well-sized stainless griddle insert for gas grills; measure the grate first and plan on oil, since stainless is not truly non-stick.
Onlyfire griddle insert specs
18 x 12.5 x 2.7 in
Outer size; leave room around it for heat to rise.
Over 200 sq in
Cooking surface stated in the listing.
Stainless steel
No seasoning layer to maintain; needs oil for eggs.
8.71 lb
Light enough to lift on and off the grill.
Welded cross bracing
Meant to keep the plate flat and spread heat.
Design and build
The Onlyfire insert is a flat stainless steel plate with raised sidewalls on the edges, welded cross bracing underneath, wavy ventilation in the design and a grease groove that runs along the cooking surface. The two handles bolt on and come off with the included wrench, so the plate can sit under a closed lid on many grills. The listing calls the surface non-stick; stainless steel still needs a film of oil, so read that as easy-release rather than coated.
Everyday use
Set the insert over two burners, run them on medium for several minutes and oil the plate before the first food goes on. The 2.7 in sidewalls let you push hash browns or onions around without them sliding off, and the trough moves grease away from the food. Remove the handles if the lid will not close over them. Let it cool on the grill, then scrape and wash it like any stainless pan.
Before you buy the Onlyfire 18 x 12.5 insert
Checks before ordering.
Check before you buy
- Grate must exceed 18 x 12.5 in
- Lid clearance with handles on
- Oil the stainless surface
- Model code F1-BGG8201-SS
The product at a glance
Onlyfire 18"x12.5" Stainless Steel Griddle Insert
Best for: Adding a griddle to a gas grill
- Cooking Area
- Over 200 sq. in.
- Surface Material
- Stainless Steel
- Fuel Type
- Gas, Charcoal
- Application
- Camping, Tailgating
- Compatible Appliance
- Griddle
- Dimensions
- 18 × 12.5 × 2.75 inches
View on Amazon: Onlyfire 18"x12.5" Stainless Steel Griddle Insert Affiliate link
Onlyfire 18 x 12.5 in stainless steel griddle insert: over 200 sq in, 2.7 in high sidewalls, grease trough, welded bracing, two removable handles with wrench, 8.71 lb, for gas and charcoal grills.
Pros
- Adds a griddle zone to a grill
- Sidewalls hold loose food
- Handles detach for lid clearance
Cons
- Stainless needs oil to release
- Needs a grate wider than 18 in
- No warranty stated
Good fit if
- Your grill has a 20 in plus grate
- You want breakfast on the grill
Skip if
- You own a tabletop grill
- You want a seasoned steel plate
Verdict: A stainless griddle insert that turns a gas grill into a part-time flat top.
Specifications side by side
| Spec | Onlyfire 18"x12.5" Stainless Steel Griddle Insert |
|---|---|
| Cooking Area | Over 200 sq. in. |
| Surface Material | Stainless Steel |
| Fuel Type | Gas, Charcoal |
| Application | Camping, Tailgating |
| Material | Stainless Steel |
| Compatible Appliance | Griddle |
| Dimensions | 18 × 12.5 × 2.75 inches |
| Weight | 8.71 pounds |
| Size | 18" x 12.5" x 2.7" |
| Color | Silver |
| Model | FBA_F1-BGG8201-SS |
Frequently asked questions
Will the Onlyfire 18 x 12.5 griddle fit my grill?
It fits a grill whose cooking grate is larger than 18 x 12.5 in; the listing says it suits most gas grills, so measure yours first.
How much cooking area does the Onlyfire 18 x 12.5 insert give?
Over 200 sq in, per the listing.
How heavy is the Onlyfire 18 x 12.5 griddle insert?
8.71 lb.
Does the Onlyfire 18 x 12.5 insert work on charcoal grills?
The listing names gas and charcoal grills; keep the coals spread under the whole plate.
Can the Onlyfire 18 x 12.5 handles be removed?
Yes, the two handles come off and a wrench is included.
See also
- onlyfire stainless steel kamado cooking grate system review
- monument grills k104bsbgd2s 4 2 burner propane grill review
- monument grills mesa400mf 4 burner propane grill review
- best outdoor pizza ovens under 100
- best outdoor pizza ovens under 150
- 9 Best Outdoor Pizza Ovens Under $200, Compared
- Best Outdoor Pizza Ovens Under $300 in 2026: 10 Picks Ranked by Specs
- Best Outdoor Pizza Ovens Under $500: 9 Spec-Based Picks
- kraus stainless steel 18 in review
- useluck 12 inch stainless steel review
