As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

LAMGENIE 9004200136 Stainless Charcoal Grate for Masterbuilt Gravity Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The LAMGENIE charcoal grate is a 309S stainless steel replacement for Masterbuilt part 9004200136, and it suits Gravity Series 560, 800 and 1050 or Gravity XT owners whose original grate has warped or rusted through. It measures 9.8 x 9.8 inches, drops in without tools, and LAMGENIE matches it to grill models MB20040220, MB20041220 and MB20041020. 309S is a heat-resisting stainless grade, which suits a part that sits under burning charcoal. The listing gives no weight and no bar spacing, and one line says it replaces a cold smoker attachment setup, which does not match the rest of the description, so read the Gravity fit list as the claim to rely on. This LAMGENIE review is based on the listing and published specs; we did not fit it.

What stands out

  • Replaces Masterbuilt 9004200136
  • Gravity 560, 800, 1050, XT
  • LAMGENIE grate: 309S stainless
  • 9.8 x 9.8 in drop-in

Who it fits

Good fit for

Masterbuilt Gravity 560, 800, 1050 and XT owners replacing a warped or rusted charcoal grate.

Who should skip it

Owners of non-Gravity Masterbuilt smokers, and anyone who wants a listed weight or bar spacing.

Verdict: A heat-resisting stainless 9004200136 replacement for Gravity grills.

LAMGENIE 9004200136 specs

LAMGENIE part: 9004200136

Masterbuilt charcoal grate.

LAMGENIE fit: MB20040220, MB20041220, MB20041020

Gravity 560, 800, 1050 and XT.

LAMGENIE material: 309S stainless

Heat-resisting grade.

LAMGENIE size: 9.8 x 9.8 in

1 in tall field.

No weight or bar spacing

Cold smoker line is unclear.

Where the LAMGENIE grate goes in a Gravity grill

In a Masterbuilt Gravity grill, charcoal feeds down from the hopper into a small firebox, and the grate is the floor of that firebox. It holds the burning coals while the fan pushes air through it, so it runs hotter than any other part and is the piece that sags or flakes first. The LAMGENIE uses 309S stainless for that reason.

Swapping in the LAMGENIE grate

With the grill cold and the hopper empty, open the firebox, lift out the old grate and brush out ash from below. Drop the LAMGENIE grate into the same slot, check it sits level and does not rock, then close up and run a short burn before the next cook.

Before you buy the LAMGENIE grate

Choose the LAMGENIE 9004200136 grate if you want 309S stainless for your Gravity 560, 800 or 1050; choose the COMVIEE 9004200136 grate if you want a listing that adds MB20040221 and MB20040122 to the fit list and gives a 1.5 lb weight and a 1-year warranty.

Check before you buy

  • Confirm part 9004200136
  • Gravity Series only
  • No weight listed
  • Empty the hopper first

The product at a glance

LAMGENIE 9.8-Inch Masterbuilt Stainless Charcoal Grate

Best for: Gravity 560, 800 and 1050 owners

Compatible Grill
Masterbuilt Gravity 560, 800, 1050, XT
Material
309S stainless steel
Dimensions
9.8" x 9.8" x 1"
Grate Type
Charcoal grate
Piece Count
1

View on Amazon: LAMGENIE 9.8-Inch Masterbuilt Stainless Charcoal Grate Affiliate link

LAMGENIE charcoal grate, Masterbuilt part 9004200136: 309S stainless, 9.8 x 9.8 in, for Gravity 560, 800, 1050 and XT.

Pros

  • 309S heat-resisting steel
  • LAMGENIE lists three model codes
  • Tool-free fit

Cons

  • No weight listed
  • Unclear cold smoker claim
  • Gravity only

Good fit if

  • Your Gravity grate warped
  • You own a Gravity 800

Skip if

  • You own a non-Gravity smoker
  • You need bar spacing

Verdict: A 309S stainless replacement charcoal grate for Gravity grills.

Specifications side by side

Spec LAMGENIE 9.8-Inch Masterbuilt Stainless Charcoal Grate
Compatible Grill Masterbuilt Gravity 560, 800, 1050, XT
Material 309S stainless steel
Dimensions 9.8" x 9.8" x 1"
Grate Type Charcoal grate
Piece Count 1
Fuel Type Charcoal
Color silvery white
Model 9004200136

Frequently asked questions

Which grills does the LAMGENIE 9004200136 grate fit?

Masterbuilt Gravity Series 560, 800 and 1050 and Gravity XT, including MB20040220, MB20041220 and MB20041020.

What is the LAMGENIE Gravity grate made of?

309S stainless steel.

What size is the LAMGENIE 9004200136 grate?

9.8 x 9.8 inches.

Does the LAMGENIE Gravity grate need tools to fit?

No, it drops into the firebox in place of the old grate.

How much does the LAMGENIE Gravity grate weigh?

LAMGENIE does not list a weight.

See also