Grill Valueparts Weber Spirit 200 Flavorizer Bar and Burner Kit Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This Grill Valueparts kit (model REV190223-7635K) rebuilds the inside of a two-burner Weber Spirit 200 series grill: three stainless steel flavorizer bars at 15 3/10 x 2 3/5 inches and three burner tubes (two 18-inch main tubes and a 10 1/2-inch crossover tube, per the listing). It replaces Weber parts 7635 and 68949. It is for owners of a front-control Spirit or Spirit II E-210, E-220, S-210 or S-220 (2013 on) whose bars have rusted through or whose burners light unevenly. It does NOT fit side-control Spirit models from 2007-2012. This is an accessory review drawn from the listing, not from installing the kit.
What stands out
- 3 stainless flavorizer bars
- 3 burner tubes incl. crossover
- Replaces Weber 7635 and 68949
- Front-control Spirit 200, 2013 on
Who it fits
Good fit for
Owners of a front-control Weber Spirit or Spirit II 200 series grill with rusted bars or tired burners.
Who should skip it
Side-control Spirit owners (2007-2012) and anyone with a three-burner Spirit 300, which needs a different kit.
Verdict: A full bar-and-burner refresh for front-control Spirit 200 grills; confirm the control layout first.
REV190223-7635K kit contents
3 flavorizer bars
15 3/10 x 2 3/5 in each, stainless steel.
2 main burner tubes
18 in each.
1 crossover tube
10 1/2 in.
Replaces 7635, 68949
Plus other Weber numbers in the listing.
Fit
Spirit/Spirit II E-210, E-220, S-210, S-220, front controls.
What is in the Grill Valueparts Spirit 200 kit
The bars are stainless steel tents that sit over the burners, shield them from grease and vaporize drippings into smoke. The burner tubes match the Spirit 200 two-burner layout plus the short crossover that carries flame between burners. The listing names many Weber grill codes (46110001, 44010001 and others) so you can match your data plate.
Fitting the kit to a Spirit 200
Shut off the gas, lift out the grates and old bars, then unscrew the burner tubes from inside the firebox and fit the new set so each tube seats over its valve. Drop the three bars back in and check for an even blue flame on the first light. Note the main burners, crossover and bars are listed as a set; you cannot buy one piece from this listing.
Before you order for a Spirit 200
Match these.
Check before you buy
- Controls on the front panel
- Two-burner Spirit 200 or Spirit II 200
- Grill from 2013 or later
- Compare your old bar length
The product at a glance
Grill Valueparts Spirit 200 Series Burner Kit
Best for: Spirit 200 rebuilds
- Burner Length
- 18"
- Burner Type
- burner tube
- Material
- stainless steel
- Burner Quantity
- 3
- Included Components
- flavorizer bars
View on Amazon: Grill Valueparts Spirit 200 Series Burner Kit Affiliate link
Grill Valueparts kit for Weber Spirit 200 (REV190223-7635K): three stainless flavorizer bars 15 3/10 x 2 3/5 in and three burner tubes (two 18 in mains, one 10 1/2 in crossover), replaces Weber 7635 and 68949; front-control Spirit/Spirit II E/S-210 and 220, 2013 on.
Pros
- Bars and burners in one kit
- Stainless bars resist rust
- Long fit list by part number
Cons
- Not for side-control Spirits
- Third-party, not Weber
- No single-piece option
Good fit if
- Your Spirit 200 bars are rusted
- Your burners flame unevenly
Skip if
- Your knobs sit on the side panel
- You own a Spirit 300
Verdict: A full bar and burner refresh for front-control Spirit 200 grills.
Specifications side by side
| Spec | Grill Valueparts Spirit 200 Series Burner Kit |
|---|---|
| Burner Length | 18" |
| Burner Type | burner tube |
| Material | stainless steel |
| Burner Quantity | 3 |
| Included Components | flavorizer bars |
| Size | '15.25" Flavorizer bars+17.9" Burner |
| Color | Spirit 200 Series 2 Burner Stainless |
| Model | REV190223-7635K |
Frequently asked questions
Does the Grill Valueparts Spirit 200 kit fit side-control grills?
No. It fits front-control Spirit and Spirit II 200 models from 2013 on.
What Weber parts does the Grill Valueparts REV190223-7635K replace?
Weber 7635 flavorizer bars and the 68949 burner tube kit, among others.
How long are the Grill Valueparts Spirit 200 flavorizer bars?
15 3/10 inches long and 2 3/5 inches wide.
How many burner tubes come in the Grill Valueparts Spirit 200 kit?
Three: two 18-inch main tubes and a 10 1/2-inch crossover.
What are the Grill Valueparts Spirit 200 flavorizer bars made of?
Stainless steel.
