As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Grill Valueparts Spirit 200 Enamel Flavorizer Bar and Burner Kit Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The Grill Valueparts REV200303-02KIT is an aftermarket rebuild kit for two-burner Weber Spirit and Spirit II 200 series gas grills with front-mounted controls (2013 to current). It packs three enamel Flavorizer bars at 15 3/10 x 3 3/5 in each and three burner tubes: 18 in main tubes and a 10 1/2 in crossover tube. Our verdict: a sensible one-box refresh when a Spirit E-210, E-220, S-210 or S-220 has rusted-through bars and uneven flames, as long as you confirm your grill has front controls first. It does not fit side-control Spirit grills from 2007 to 2012. The kit lists Weber part numbers 7635 (bars) and 68949 (burner tube kit) among its cross-references and weighs 4 lb. Bars come in enamel rather than stainless steel. This review is based on the Grill Valueparts listing and fit list, not on installing the kit.

What stands out

  • 3 enamel Flavorizer bars, 15 3/10 x 3 3/5 in
  • 3 burner tubes incl. 10 1/2 in crossover
  • Fits Spirit/Spirit II 200 front-control grills
  • REV200303-02KIT stands in for Weber 7635/68949

Who it fits

Good fit for

Owners of 2013-and-later Weber Spirit or Spirit II 200 grills with front controls whose bars and burners are worn out.

Who should skip it

Side-control Spirit owners (2007-2012), Spirit 300 owners, and anyone who prefers stainless bars.

Verdict: A complete bar-and-burner refresh for front-control Spirit 200 grills.

Grill Valueparts REV200303-02KIT: listed specs

REV200303-02KIT bars: 3 enamel Flavorizer bars

15 3/10 x 3 3/5 in each.

REV200303-02KIT burners: 3 tubes

18 in main, 10 1/2 in crossover.

REV200303-02KIT fit: Spirit and Spirit II 200, front controls

2013 to current models.

REV200303-02KIT does not fit: side-control Spirit 2007-2012

Check where your knobs are.

REV200303-02KIT cross-reference: Weber 7635, 68949, 69785

Plus 67045, 67024 and others.

REV200303-02KIT weight: 4 lb

Whole kit in one pack.

What is in the Grill Valueparts REV200303-02KIT

The kit has two jobs. The three enamel Flavorizer bars sit over the burners, catch drippings and vaporize them for smoke flavor while shielding the burner ports from grease. The burner tubes replace the main burners and the crossover tube that carries flame from one burner to the next at ignition. Grill Valueparts lists Spirit E-210, E-220, S-210 and S-220 plus their Spirit II versions, and Weber model numbers such as 46110001 and 44010001.

Fitting the REV200303-02KIT to a Weber Spirit 200

Shut off and disconnect the propane, lift out the grates and old bars, and unscrew the old burner tubes from the front of the cook box. Seat the new 18 in tubes over the valve orifices, fit the 10 1/2 in crossover tube, then drop in the three enamel bars and the grates. Light each burner and check for an even blue flame along the tube. Enamel bars wipe clean but can chip if knocked, so set them in place rather than dropping them.

Before you buy the Grill Valueparts REV200303-02KIT

Choose the REV200303-02KIT if your Spirit 200 has front controls and you want enamel bars; choose the Grill Valueparts REV190223-7635K kit if you want the same bar-and-burner set with stainless steel bars.

Check before you buy

  • REV200303-02KIT fits front-control Spirit 200 only
  • Not for 2007-2012 side-control grills
  • Bars are enamel, not stainless
  • Compare your old parts to 7635 and 68949

The product at a glance

Grill Valueparts Spirit 200 Burner and Flavorizer Bar Kit

Best for: Spirit 200 owners

Weight
4 pounds

View on Amazon: Grill Valueparts Spirit 200 Burner and Flavorizer Bar Kit Affiliate link

Grill Valueparts REV200303-02KIT: 3 enamel Flavorizer bars and 3 burner tubes for front-control Weber Spirit and Spirit II 200 grills.

Pros

  • REV200303-02KIT replaces bars and burners at once
  • Clear front-control fit note
  • Cross-referenced to Weber 7635

Cons

  • REV200303-02KIT enamel can chip
  • No side-control fit
  • Fit only for 2-burner Spirit 200

Good fit if

  • Your Spirit 200 has front knobs and worn bars
  • You want bars and burners in one box

Skip if

  • Your Spirit 200 knobs are on the side
  • You want stainless bars

Verdict: A full bar-and-burner refresh for front-control Spirit 200 grills.

Specifications side by side

Spec Grill Valueparts Spirit 200 Burner and Flavorizer Bar Kit
Weight 4 pounds
Color Spirit 200 Series 2 Burner Enamel
Model REV200303-02KIT

Frequently asked questions

Does the Grill Valueparts REV200303-02KIT fit a Spirit E-210?

Yes, the Spirit E-210 and Spirit II E-210 with front-mounted controls (2013 to current) are on its fit list.

Will REV200303-02KIT fit a side-control Spirit?

No, Grill Valueparts says it does not fit 2007-2012 side-control Spirit grills.

What Weber parts does the REV200303-02KIT replace?

It cross-references Weber 7635 Flavorizer bars and the 68949 burner tube kit, among others.

How long are the REV200303-02KIT burner tubes?

18 in for the main tubes and 10 1/2 in for the crossover tube.

Are the REV200303-02KIT Flavorizer bars stainless?

No, this version has enamel bars.

See also