As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

GDCERIX BZ-IB1-41 Infrared Sear Burner for Cal Flame Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

The GDCERIX BZ-IB1-41 is an infrared sear zone burner for Cal Flame G Series, P Series and Convection gas grills, and it suits Cal Flame owners who want one burner position to run as a high-heat sear zone. GDCERIX lists it as a replacement for Cal Flame part BBQ07890P, rated at 15,000 BTU in the title, built from stainless steel with a ceramic infrared face. It measures 5 5/8 x 3 3/8 x 12 1/2 inches. The listing says any standard burner position on those grills can take it, so you can swap a tube burner for this sear unit. One burner comes in the box; no gasket, screws or valve parts are listed. This GDCERIX sear burner review is based on the listing and published specs, not on fitting it to a grill.

What stands out

  • Cal Flame G, P, Convection
  • Replaces BBQ07890P
  • 15,000 BTU infrared
  • BZ-IB1-41 is 12 1/2 in long

Who it fits

Good fit for

Cal Flame G, P or Convection owners who want an infrared sear zone or need to replace part BBQ07890P.

Who should skip it

Owners of other grill brands, or anyone who needs mounting hardware in the box.

Verdict: A direct-fit infrared sear burner for Cal Flame G, P and Convection grills.

GDCERIX BZ-IB1-41 specs

BZ-IB1-41 fit: Cal Flame G, P, Convection

Replaces part BBQ07890P.

BZ-IB1-41 output: 15,000 BTU

Infrared, per the title.

BZ-IB1-41 size: 5 5/8 x 3 3/8 x 12 1/2 in

Measure your old burner.

BZ-IB1-41 build: stainless and ceramic

Ceramic infrared face.

BZ-IB1-41 box: one burner

No hardware listed.

How the GDCERIX BZ-IB1-41 is built

The BZ-IB1-41 is a stainless box burner with a ceramic tile face: gas burns across the ceramic, which glows and throws radiant heat straight up at the grate. That is different from a tube burner, which heats mostly by hot air. The 12 1/2-inch length and 5 5/8-inch width match one burner slot on the Cal Flame frames it lists.

Using the GDCERIX BZ-IB1-41

Remove the old burner from the slot you want as a sear zone, set the BZ-IB1-41 in its place and line it up with the valve. Light it, let the ceramic glow, then sear steaks for a short time before moving them to a regular burner to finish. Keep grease off the ceramic face and brush it only when cold.

Before you buy the GDCERIX BZ-IB1-41

Choose the GDCERIX BZ-IB1-41 if your Cal Flame takes part BBQ07890P and you want a 15,000 BTU infrared sear zone; stay with a standard Cal Flame tube burner if you only want even heat across the grate and do not sear often.

Check before you buy

  • Check for part BBQ07890P
  • Measure the burner slot
  • Keep the ceramic face dry
  • Hardware not listed

The product at a glance

GDCERIX Cal Flame Infrared Searing Burner

Best for: Cal Flame owners

Burner Length
12 1/2"
Burner Type
Infrared searing burner
Material
Stainless steel, ceramic
Burner Quantity
1
Heat Output
15,000 BTU
Fuel Type
Gas

View on Amazon: GDCERIX Cal Flame Infrared Searing Burner Affiliate link

GDCERIX BZ-IB1-41 infrared sear zone burner for Cal Flame G Series, P Series and Convection grills; replaces BBQ07890P, 15,000 BTU, stainless with ceramic face, 5 5/8 x 3 3/8 x 12 1/2 in.

Pros

  • BZ-IB1-41 names the OEM part
  • Fits any burner slot
  • Ceramic infrared face

Cons

  • Cal Flame only
  • No hardware listed
  • BTU only in title

Good fit if

  • You own a Cal Flame
  • You want a sear zone

Skip if

  • Your grill is another brand
  • You need mounting parts

Verdict: A direct-fit infrared sear burner for Cal Flame grills.

Specifications side by side

Spec GDCERIX Cal Flame Infrared Searing Burner
Burner Length 12 1/2"
Burner Type Infrared searing burner
Material Stainless steel, ceramic
Burner Quantity 1
Heat Output 15,000 BTU
Fuel Type Gas
Use Searing
Heating Method Infrared
Dimensions 12.5 × 5.5 × 3.4 inches
Color Silver
Model BZ-IB1-41

Frequently asked questions

Does the GDCERIX BZ-IB1-41 fit my Cal Flame grill?

It is listed for Cal Flame G Series, P Series and Convection gas grills, as a replacement for part BBQ07890P.

How many BTU is the GDCERIX BZ-IB1-41 sear burner?

15,000 BTU, per the title.

Can the GDCERIX BZ-IB1-41 replace a standard Cal Flame burner?

GDCERIX says any standard burner position on those grills can be switched to this sear burner.

What size is the GDCERIX BZ-IB1-41?

5 5/8 x 3 3/8 x 12 1/2 inches.

What comes with the GDCERIX BZ-IB1-41?

One infrared sear zone burner; no screws or gaskets are listed.

See also