As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure

Criditpid Char-Broil Advantage 4-Burner Burner and Heat Plate Kit Review (2026)

Latest update:

As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.

This Criditpid kit replaces the burners and heat plates of Char-Broil Advantage series gas grills; it is a parts kit, not a grill. The box holds four stainless burner tubes (14 3/8 x 5/8 in), four stainless heat plates (15 1/8 x 2 in) and three crossover tubes that adjust from 5 to 9 in. Criditpid names 4-burner models 463344015, 463433016, 463240015, 466433016, 469432215 and 463432215, 3-burner models 463343015, 463370015 and 466343015, the 2-burner 463642116, and says 6-burner models 463235815 and 463240115 need two kits. The listing stresses that its heat plates are 15 1/8 in, not 16 15/16 in, and points owners who need the longer size to a separate listing. No cooking grates or igniters are included. Our verdict: a low-cost refresh for Advantage owners whose burners rust through or light unevenly, as long as the old parts measure the same. This Criditpid burner kit review is based on the listing's sizes and fit list, not on fitting it ourselves.

What stands out

  • 4 stainless burners, 14 3/8 in
  • 4 stainless heat plates, 15 1/8 in
  • 3 crossovers, 5-9 in
  • No grates or igniters

Who it fits

Good fit for

Char-Broil Advantage owners whose burners or heat plates have rusted, with old parts that match these sizes.

Who should skip it

Owners whose heat plates measure 16 15/16 in, Performance-series owners, and anyone who also needs grates or igniters.

Verdict: A cheap burner-and-plate refresh for Char-Broil Advantage grills.

Criditpid Advantage kit: listed parts

Criditpid Advantage burners: 4 stainless tubes, 14 3/8 x 5/8 in

Match your old burner length.

Criditpid Advantage heat plates: 4 stainless, 15 1/8 x 2 in

Not the 16 15/16 in size.

Criditpid Advantage crossovers: 3, adjust 5-9 in

Carry flame between burners.

Criditpid Advantage 4-burner fit: 463344015, 463433016, 463240015, 466433016, 469432215, 463432215

Main target models.

Criditpid Advantage other fits: 3-burner 463343015/463370015/466343015, 2-burner 463642116

6-burner 463235815/463240115 need two kits.

Criditpid Advantage kit exclusions: grates, igniters

Buy separately if worn.

What the Criditpid Advantage parts are made of

The burner tubes and heat plates are stainless steel, which Criditpid says resists rust. The heat plates are narrow inverted-V tents, 2 in wide, that sit over each burner to shield it from drips and spread heat. The crossover tubes slide to length so the flame passes from one lit burner to the next.

Fitting the Criditpid Advantage kit

Turn off the propane and disconnect the tank. Remove the grates and old heat plates, then unscrew each burner from the rear wall and slide it off the valve. Measure an old burner and plate against 14 3/8 in and 15 1/8 in before going further. Fit the new burners over the valves, set the crossovers, add the plates and grates, then leak-test with soapy water before lighting.

Before you buy the Criditpid Advantage kit

Choose this Criditpid kit if your Advantage grill's plates measure 15 1/8 in; choose Criditpid's full Performance 2-burner kit instead if you own a Performance grill and also need grates and igniters.

Check before you buy

  • Criditpid Advantage kit: measure plates first (15 1/8 in)
  • Burners 14 3/8 in
  • No grates or igniters
  • 6-burner grills need two kits

The product at a glance

Criditpid 4-Burner Stainless Steel Grill Rebuild Kit

Best for: Char-Broil Advantage

Burner Length
14 3/8"
Burner Type
tube burner
Material
stainless steel
Burner Quantity
4
Included Components
heat plates, crossover tubes
Fuel Type
Gas

View on Amazon: Criditpid 4-Burner Stainless Steel Grill Rebuild Kit Affiliate link

Criditpid kit for Char-Broil Advantage 4-burner grills (463344015 and others): four 14 3/8 in stainless burners, four 15 1/8 in stainless heat plates, three 5-9 in crossover tubes.

Pros

  • Criditpid Advantage kit is low-cost
  • Sizes and fit list are specific
  • All stainless

Cons

  • Criditpid Advantage kit has no grates or igniters
  • Plate size must match
  • Two kits for 6 burners

Good fit if

  • Your Advantage burners have rusted
  • Your plates measure 15 1/8 in

Skip if

  • Your plates are 16 15/16 in
  • You also need grates

Verdict: A budget burner refresh for Advantage grills.

Specifications side by side

Spec Criditpid 4-Burner Stainless Steel Grill Rebuild Kit
Burner Length 14 3/8"
Burner Type tube burner
Material stainless steel
Burner Quantity 4
Included Components heat plates, crossover tubes
Fuel Type Gas
Size 4-Burner
Dimensions 16 × 2 × 2 inches
Color Grill Parts
Model 4 burner

Frequently asked questions

Which Char-Broil grills does the Criditpid Advantage 4-burner kit fit?

4-burner Advantage models 463344015, 463433016, 463240015, 466433016, 469432215 and 463432215, plus listed 3-burner and 2-burner models.

How long are the Criditpid Advantage heat plates?

15 1/8 in; Criditpid warns they are not the 16 15/16 in size.

How long are the Criditpid Advantage burner tubes?

14 3/8 in by 5/8 in.

Does the Criditpid Advantage kit include grates or igniters?

No, only burners, heat plates and crossover tubes.

Can the Criditpid Advantage kit be used on a 6-burner grill?

Criditpid says 6-burner models 463235815 and 463240115 need two kits.

See also