Blackstone 5856 Omnivore 36-Inch Griddle Hood Review (2026)
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The Blackstone 5856 is a lift-on steel hood made for Blackstone 36-inch Omnivore griddles, and it is an accessory, not a griddle. Our pick for who should buy it is simple: owners of a 36-inch Omnivore with the rear grease cup who cook outdoors without a lid and want one that matches. It is powder-coated steel with a stainless front handle, measures 38.5 x 25 x 8.5 inches and weighs 21 pounds. It goes on and comes off without tools. This review is based on the product listing and published specs; we did not use the hood ourselves.
What stands out
- Made for 36-inch Omnivore griddles
- Powder-coated steel shell
- Stainless steel front handle
- Fits without tools
Who it fits
Good fit for
Owners of a 36-inch Blackstone Omnivore with rear grease management who want a matching steel hood to keep rain and dust off the plate between cooks.
Who should skip it
Owners of front-grease Blackstone models, 28-inch or 22-inch griddles, or anyone who wants a hinged lid or a built-in thermometer (neither is listed).
Verdict: A plain, matching steel hood for the 36-inch Omnivore: worth it if your griddle has the rear grease system and no lid yet.
Blackstone 5856 hood specs
Fits 36-inch Omnivore griddles
Rear grease management models only.
Powder-coated steel
Weather-resistant outer finish.
38.5 x 25 x 8.5 in
Length, width and height of the hood.
21 lb
Heavy enough to sit firmly on the plate.
Stainless front handle
Lift point at the front edge.
Design and build
The 5856 is a single steel shell finished in black powder coat, shaped to sit over the cooking surface of the 36-inch Omnivore. A stainless handle runs along the front so you lift it from the cook's side. There are no tools or brackets in the setup: you place it on the griddle and lift it off. The listing does not mention hinges, a thermometer, vents or a warranty, so treat it as a lid and cover rather than a cooking hood with gauges.
Everyday use
After a cook, let the plate cool, wipe it and set the 5856 over it so rain does not sit on the seasoned steel and dust stays off. During a cook you can lower it over the plate to melt cheese on smash burgers or keep a batch of food warm while the next one cooks. At 21 pounds it needs two hands, and you will want a spot beside the griddle to rest it.
Before you buy the 5856
Check your griddle first.
Check before you buy
- 36-inch Omnivore with rear grease cup
- Room beside the griddle to set a 38.5 in hood
- No hinge, gauge or warranty listed
- Accessory only: griddle not included
The product at a glance
Blackstone 36-Inch Omnivore Steel Griddle Hood
Best for: 36-inch Omnivore owners
- Primary Material
- Powder coated steel
- Form Factor
- Built-In
- Compatible Appliance
- Griddle
- Cover
- Hood
- Dimensions
- 38.5 × 25 × 8.5 inches
- Weight
- 21 pounds
View on Amazon: Blackstone 36-Inch Omnivore Steel Griddle Hood Affiliate link
Blackstone 5856: lift-on powder-coated steel hood for 36-inch Omnivore griddles with rear grease management; stainless front handle, 38.5 x 25 x 8.5 in, 21 lb, no tools needed.
Pros
- Matching fit for the 36-inch Omnivore
- Steel shell with stainless handle
- Goes on and off without tools
Cons
- Rear-grease models only
- No hinge or thermometer listed
- 21 lb to lift
Good fit if
- You own a 36-inch Omnivore with a rear grease cup
- You want a steel lid instead of a fabric cover
Skip if
- Your griddle uses front grease management
- You want a hinged hood with a gauge
Verdict: A matching steel hood for the 36-inch Omnivore griddle.
Specifications side by side
| Spec | Blackstone 36-Inch Omnivore Steel Griddle Hood |
|---|---|
| Primary Material | Powder coated steel |
| Form Factor | Built-In |
| Material | Steel |
| Compatible Appliance | Griddle |
| Cover | Hood |
| Dimensions | 38.5 × 25 × 8.5 inches |
| Weight | 21 pounds |
| Size | 36 inches |
| Color | Powder Coated Black |
| Model | 5856 |
Frequently asked questions
Does the Blackstone 5856 hood fit front-grease 36-inch griddles?
The listing names Blackstone models with the rear grease management system only.
How big is the Blackstone 5856 hood?
38.5 inches long, 25 inches wide and 8.5 inches high.
How much does the Blackstone 5856 hood weigh?
21 pounds.
Does the Blackstone 5856 need tools to install?
No. It is placed on and lifted off by hand.
What is the Blackstone 5856 hood made of?
Powder-coated steel with a stainless steel front handle.
See also
- blackstone 6017 22 inch griddle carry bag review
- blackstone 1554 36 inch 4 burner griddle review
- blackstone 2287 28 inch omnivore griddle hood review
- blackstone 1666 22 tabletop griddle review
- Blackstone 22-Inch Tabletop Griddle Without Hood Review (2026)
- Blackstone 1935 22-Inch On The Go Scissor-Leg Griddle with Hood Review (2026)
- Blackstone 4146 Griddle Seasoning and Cast Iron Conditioner Review (2026)
- blackstone 2309 iron forged 36 review
- turbro 36 review
